(12)MAKE YOUR OWN CRUDE COCKTAIL MACHINE(อ้างอิงhttps://www.instructables.com/id/Make-Your-Own-Crude-Cocktail-Machine/)

Step 1: Watch the Video!

The video gives you a good idea of what is necessary to create your own Cocktail Machine. In the next steps though, I will present you more detailed information.

Step 2: Order Your Components!

Picture of Order Your Components!
Picture of Order Your Components!
Here you can find a parts list with example seller:
Amazon.com:
1x Arduino Nano: http://amzn.to/2iMDj2k
1x Rotary Encoder: http://amzn.to/2iLT7SF
1x Load Cell (1kg) + HX711 ADC IC: http://amzn.to/2AIadcu
2x L298N Breakout Board: http://amzn.to/2iL0IRx
3x Peristaltic Pump: http://amzn.to/2AU2Qkr
1x 15V 5A Power Supply: http://amzn.to/2iKENtL
Ebay:
1x Load Cell (1kg) + HX711 ADC IC: http://rover.ebay.com/rover/1/711-53200-19255-0/1?...
Amazon.de:
1x Arduino Nano: http://amzn.to/2kia87h
1x Rotary Encoder: http://amzn.to/2khsqFK
1x Load Cell (1kg) + HX711 ADC IC: http://amzn.to/2B37Y6d
2x L298N Breakout Board: http://amzn.to/2yc6scc
3x Peristaltic Pump: http://amzn.to/2khsAgk
1x 15V 5A Power Supply: http://amzn.to/2B6SWfK
You can get the beech plywood and the food safe silicone tube in your next home improvement store.

Step 3: Build the Enclosure!

Picture of Build the Enclosure!
Picture of Build the Enclosure!
Picture of Build the Enclosure!
3 More Images
Here you can find the plan of my enclosure and a couple of pictures. Use them as a reference to create your own housing.

Step 4: Do the Wiring and Programming!

Picture of Do the Wiring and Programming!
Picture of Do the Wiring and Programming!
Picture of Do the Wiring and Programming!
Picture of Do the Wiring and Programming!
Here you can find the schematic of the project, along with the final Cocktail Machine code and the first Test Code. Along with the included pictures, you can use them once again as a reference.
If you do not like the picture of the schematic, then you can also have a look at it here: https://easyeda.com/editor#id=397e5435ebe143e1918a...
Before uploading the code to the Arduino, make sure to include those libraries:

Step 5: Success!

Picture of Success!
You did it! You just created your crude Cocktail Machine!
Feel free to check out my YouTube channel for more awesome projects: http://www.youtube.com/user/greatscottlab
You can also follow me on Facebook, Twitter and Google+ for news about upcoming projects and behind the scenes information:

ความคิดเห็น

แสดงความคิดเห็น

โพสต์ยอดนิยมจากบล็อกนี้

งาน18

รูปภาพ
#include <SoftwareSerial.h> #include <DHT11.h> //============================================= #include <Wire.h> #include <LiquidCrystal_I2C.h> //LiquidCrystal_I2C lcd(0x27, 16, 2); LiquidCrystal_I2C lcd(0x3F, 16, 2); SoftwareSerial ArduinoSerial(3, 2); // RX, TX //============================================= int SW_ON = 4,SW_OFF = 5,pin=6;//กำหนดขา INPUT int Sun = 9,CSun = 0,Relay1 = 12, Relay2 = 11; //กำหนดขา OUTPUT  int ATL = A0,ATH = A1;//กำหนดขา Analog int VTL1 = 0,VTH1 = 0,TL = 0,TH =0,VRHL = 50,VRHH = 80; DHT11 dht11(pin); //============================================= void setup() {   lcd.begin();   Serial.begin(115200);   ArduinoSerial.begin(4800);   while (!Serial){     ;     }   //=====================================================   lcd.setCursor(0, 0);lcd.print("Elec Pattayatech");   lcd.setCursor(0, 1);lcd.print("Smart Farm 2016 ");   delay(5000);   ...
อ่านเพิ่มเติม

งาน8

รูปภาพ
#include "LedControl.h" #include "Keypad.h" #define C4  262 #define D4  294 #define E4  330 #define F4  349 #define G4  392 #define A4  440 #define B4  494 #define C5  523 char keys[4][4]={   {7,8,9,0},   {4,5,6,0},   {1,2,3,0},   {0,0,0,0}}; byte rowPins[] = {7,6,5,4}; byte colPins[] = {3,2,1,0}; Keypad keypad = Keypad(makeKeymap(keys),rowPins,colPins,4,4); int melody[] = {C4,D4,E4,F4,G4,A4,B4,C5}; int dl = 300; int buzzerpin = 11; LedControl lc=LedControl(8,10,9,1); // Pin 8->DIN, 10->CLK, 9->CS(LOAD), 1 = No.of devices void setup() {   lc.shutdown(0,false);    lc.setIntensity(0,5);   lc.clearDisplay(0);   pinMode(buzzerpin,OUTPUT);   digitalWrite(buzzerpin,HIGH); } void loop() {   char key = keypad.getKey();   if ((key != NO_KEY) && (key < 9))   {     lc.setDigit(0,0,key,false);     tone(buzzerpin, melody...
อ่านเพิ่มเติม